Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
6-14
Accessories
Problem solving
If, after following the recommended solutions, the problem
persists, call for assistance.
The Fault Codes described below appear on the HCS display
panel.
Problem Cause Solution
Fault 052-311 Communication
problem
• Cancel or save the job.
• Power off the digital press. Wait 15 seconds and
power on.
Fault 212-252 HCS Flipper wheel
problem.
• Open Top Cover.
• Clear the paper path.
• If the fault code is still displayed, save or cancel
the job, then power off the digital press. Wait 15
seconds and power on.
Fault 212-253 HCS Flipper wheel
problem.
• Open Top Cover.
• Clear the paper path.
• If the fault code is still displayed, save or cancel
the job, then power off the digital press. Wait 15
seconds and power on.
Fault 212-251 HCS Stacking Height
problem
• Open Top Cover.
• Clear the paper path.
• If the fault code is still displayed, save or cancel
the job, then power off the digital press. Wait 15
seconds and power on.
Fault 212-254 HCS Registration
problem
• Open Top Cover.
• Clear the paper path.
• If the fault code is still displayed, save or cancel
the job, then power off the digital press. Wait 15
seconds and power on.