Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
6-5
Accessories
6 Accessories
The Top Tray accepts the following papers:
• All media types, sizes, and weights that are supported by the
digital press
• Duplexed 3 hole drilled paper must be fed short edge first,
therefore must be sent to the Top Tray
The following illustration shows the paper path for the HCS.
Figure 6-3
Media types accepted: Coated or uncoated stocks, drilled stock, Transparencies and
labels (labels can be sent only to the Top Tray)
Paper weight range for
trays:
• Stack Tray: 16 - 59 lb. (64 – 220 g/m
2)
• Top Tray: 16 - 59 lb. (64 – 280 g/m
2)
.
Special notes:
• Special materials may not run as reliably as the baseline
paper.
• Transparencies may be run to either the Top Tray or the Stack
Tray. Stack height should be limited to 100 transparencies.
Stack
Mode
Top Tray mode