Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
5-114
Scanner
Note: Options are programmed independently for each
individual segment. Therefore, after this segment is programmed
and the Start button is pressed, all options will return to the default
settings. You will have to program the desired options each time
you scan a segment.
7 When you are finished selecting options for this segment, press
the Start button.
Repeat steps 6 and 7 for each segment or press the Build Job
Controls button, described in steps 8 through 10, to access
features available after each segment is scanned.
8 Press the Build Job Controls button at the top-right corner of the
screen. The Build Job Controls screen is displayed.
Figure 5-81