Digital Color Press Operator Manual

DocuColor 5252 Operator Manual
5-24
Scanner
100%
100%, located in the Reduce/Enlarge column on the Basic
Features screen, ensures that the entire original is copied if the
paper tray selected and the original are the same size.
Auto%
The Auto% option, located in the Reduce/Enlarge column on the
Basic Features screen, automatically reduces or enlarges the
image, based on the size and orientation of the document and the
paper tray selected. This option is applied only to standard size
documents.
Select Auto% when the original document and the copy paper are
different sizes.
Key point: A factory default setting of 2 mm edge erase applies
to making copies. This setting cannot be altered.
The image is reduced or enlarged in the same proportions for the
X (horizontal) and Y (vertical) directions.
The Auto Paper option in Paper Supply is not available when
Auto% is selected and may not be available for your configuration.
Third Button
The third button in the Reduce/Enlarge column is set to a factory
default. 129% is an example of how the value can be set. This
factory default can be changed in the Tools Mode. For more
information on how to change this default, refer to the System
Administration Guide (see page 2-57).