Digital Color Press Operator Manual

DocuColor 5252 Operator Manual

5-6

Scanner

If the input document is slightly smaller or larger than a standard

size document, the DADF may detect it as a standard size

document. Dark areas or image loss along the edges may occur.

Enter the document size by using the Original Size feature or the

Edge Erase feature in the Added Features tab.

The following document types cause document jams or

malfunction of the DADF. Make copies of these documents by

placing them directly on the Document Glass.

• Book, pamphlet, and booklet documents

• Broken, creased, or paste-up documents

• Documents with clips and staples

• Transparent documents (the document size cannot be

detected automatically or the DADF belt is copied)

• Documents with black carbon

• Documents smaller than A5 size (8.5 x 5.5 inches)

• Paper weight heavier than 32 pound (128 g/m

)

• Coated paper

Key point: If you are using the DADF to scan more than 50

originals, you can use the Additional Originals option to scan the

entire stack of originals as one scan to print job. The Additional

Originals feature must be enabled in Tools Mode. Refer to the

System Administration Guide for information on how to enable this

feature (see page 2-52).