Installation Guide

SPOT-ON
56
TO EDIT A COLOR IN THE SPOT-ON MAIN WINDOW
1 Select the color that you want to edit.
2 Double-click the value under C, M, Y, and K, and enter a new number for each color channel.
The edited color appears in the color list.
NOTE: The edited color is not saved until you choose Save from the File menu.
TO EDIT A COLOR IN THE SET CENTER PATCH COLOR DIALOG BOX
1 Select the color you want to edit.
2 Double-click the color icon.
The Spot-On Color Search dialog box appears with the selected color in the center.
3 Click the center patch.
The Set Center Patch Color dialog box appears.
4 Indicate whether you want to enter CMYK values as percentages or Device Codes.
The Percentages option allows you to enter color values between 0 and 100%, in increments
of 0.5. Values out of this range are rounded to the nearest whole or half percentage.
The Device Codes option allows you to enter color values between 0 and 255. This option
reflects the full range of color values that the Fiery EXP8000/50 can reproduce and provides
finer gradations of color than are possible with Percentages.