Installation Guide
COLORWISE PRO TOOLS
19
Configuring the connection
The first time you start ColorWise Pro Tools, you must configure the connection to the Fiery
EXP8000/50.
NOTE: ColorWise Pro Tools is supported only over TCP/IP networks.
BEFORE YOU BEGIN
• Print the Configuration page from Command WorkStation and note the IP address of the Fiery
EXP8000/50.
This page contains information that you need when you configure the connection. For TCP/
IP installations, you can use the Domain Name Server (DNS) name of the Fiery EXP8000/50
instead of the IP address. Make that sure the Fiery EXP8000/50 is listed in a DNS used by
your network. For more information, see the documentation that accompanies your
Macintosh system.
TO CONFIGURE THE CONNECTION FOR COLORWISE PRO TOOLS
1 Double-click the ColorWise Pro Tools icon.
The Choose Printer Device dialog box appears.
2 If the No Servers Configured dialog box appears, click OK. If the Choose Printer Device dialog
box appears, click Add.