Installation Guide

COLORWISE PRO TOOLS
14
Configuring the connection
The first time you start ColorWise Pro Tools, you must configure the connection to the Fiery
EXP8000/50.
BEFORE YOU BEGIN
Print the Configuration page from Command WorkStation and note the IP address of the Fiery
EXP8000/50.
This page contains information that you need when configuring the connection, such as the
IP address. For TCP/IP installations, you can use the Domain Name Server (DNS) name of
the Fiery EXP8000/50 instead of the IP address. Make sure the Fiery EXP8000/50 is listed in
a DNS used by your network. For more information, see the documentation that
accompanies your Windows system.
TO CONFIGURE THE CONNECTION FOR COLORWISE PRO TOOLS
1 Start ColorWise Pro Tools.
2 If the Choose Printer Device dialog box appears, click Add.
3 Enter the appropriate information for the Fiery EXP8000/50.
Nickname: Type a name for the Fiery EXP8000/50. This name does not have to match the
actual Server Name of the Fiery EXP8000/50.
NOTE: The nickname cannot contain the following characters:
[ ] _ " ' <space> <tab>
Server Name or Server IP address: Type the IP address (or DNS name) of the Fiery EXP8000/
50.
New Device: Type the device name of the Fiery EXP8000/50: DC8000-DC7000 or DC5000.
4 After you type all the information, click Add.