Owner manual
Page 3
(Bypass)
hint: (1 with IQ=21) below means system settings paper type 1 and image quality 21, other syste
m
setting numbers are indicated in the same manner.
123434 5
A=Auto Duplex M=Manual Duplex
S=Simplex Only PCW=Post Consumer
Waste ECF=Elemental Chlorine Free
IQ=Image Quality System Setting
Media
Alternative Gloss Setting (applicable to all media run from trays 1-4)
Mode
Paper Type
System
Setting
Weight
Trays
Trays 1,2,3,4 & 5: Plain/Bond/Recycled (64-98gsm) Transparency
Heavyweight 1 (99-169gsm) Coated 1 (120-160gsm) Heavyweight 2 / Coated 2 (170-220gsm) Label
Paper Types are selected within system settings.
Additional Information
Option 2
Hi CapSizeRe-Order #
Option 1
3 Tray
Note: Productivity will be decreased to enhance gloss.
RML
DC3535
North America
T
yp
e
3R11189 8.5 x 11
3R11190 17 x 11
33 Heavyweight 2A 3R11191 18 x 12
3R11430 8.5 x 11
3R11431 17 x 11
33 Heavyweight 2A 3R11432 18 x 12
23 Coated 2
33 Heavyweight 2A
23 Coated 2
33 Heavyweight 2A
25
Heavyweight 1A
3R3004 8.5 x 11
AAAAAA A
35 Gloss 1A 3R5102 11 x 17
AAAA A
33 Heavyweight 2A
199 gsm
3R6383 8.5 x 11
SSSSSS M
33 Heavyweight 2A
176 gsm
3R3041 8.5 x 11
SSSSSS M
3R5770
1 - up
8.5 x 11
SSSSSS S
3R12370
1 - up
8.5 x 11
SSSSSS S
3R5771
4-up
8.5 x 11
SSSSSS S
3R6324
10-up
8.5 x 11
SSSSSS S
3R6325
30-up
8.5 x 11
SSSSSS S
3R6320
VCR
8.5 x 11
SSSSSS S
3R6322
CD Rom
8.5 x 11
SSSSSS S
3R12372
6 up CD Rom
11 X 17
S
3R5772
1- up
8.5 x 11
SSSSSS S
3R12371
1 - up
8.5 x 11
SSSSSS S
3R5773
4-up
8.5 x 11
SSSSSS S
3R6332
10-up
8.5 x 11
SSSSSS S
3R6333
30-up
8.5 x 11
SSSSSS S
3R6328
VCR
8.5 x 11
SSSSSS S
3R6330
CD Rom
8.5 x 11
SSSSSS S
3R12373
6 up CD Rom
11 x 17
S
3R3139 33 up
8.5 x 11
SSSSSS S
3R4474 24 up
8.5 x 11
SSSSSS S
3R5719 14 up
8.5 x 11
SSSSSS S
3R4475 8 up
8.5 x 11
SSSSSS S
3R3146 6 up
8.5 x 11
SSSSSS S
3R3146 1 up
8.5 x 11
SSSSSS S
M
Paper Types can be selected within system settings or from the printer driver. If system settings are
used Coated 2 or Heavyweight 2A should be displayed on the user interface. Environmental conditions
may require that this product be fed one sheet at a time. For Tray 5(Bypass) use Coated 2 or
Heavyweight 2 (8 with IQ=27)side 1 (13 with IQ=200)side 2. Gloss variation can occur from machine
rolls, especially on high area coverage prints. User preference for Coated 1 or Coated 1 Gloss modes
may dictate using these modes.
23 Coated 2
8pt / 160
gsm
Paper Types can be selected within system settings or from the printer driver. If system settings are
used Heavyweight 2A should be displayed on the user interface. For Tray 5(Bypass) use Heavyweight 2
(8 with IQ=27)side 1 (13 with IQ=200)side 2
Paper Types can be selected within system settings or from the printer driver. If system settings are
used Heavyweight 2A should be displayed on the user interface. For Tray 5(Bypass) use Heavyweight 2
(8 with IQ=27)side 1 (13 with IQ=200)side 2
Labels are not intended as sole application of machine. Do not stack large amounts in Center Output
Tray.
Labels are not intended as sole application of machine. Do not stack large amounts in Center
Output Tray.
Labels are not intended as sole application of machine. Do not stack large amounts in Center
Output Tray.
Xerox Digital Color Super
Gloss Greeting Card
(C1S)
Xerox Index Stock
Xerox 110# Index Stock
Xerox 65# Cover
Xerox Digital Color Matte
Labels
Xerox Digital Color
Glossy Labels
8.5 x 11
8.5 x 11
17 Label Mode
17 Label Mode
Heavyweight 2S37
Xerox Digital Color Super
Gloss Trifold Brochure
(C1S)
8pt / 160
gsm
Xerox Digital Color
Supreme Gloss Recycled
(C1S)
23 Coated 2
8pt / 160
gsm
Xerox Digital Color
Supreme Gloss (C1S)
M
See 8pt Supergloss commentM
Paper Types can be selected within system settings or from the printer driver. If system
settings are used Heavyweight 1A or Gloss 1A should be displayed on the user interface. For
Tray 5 use Heavyweight 1 (1 with IQ=19)side 1 (12 with IQ=23)side 2 or Alternative Gloss
setting Heavyweight 2 (8 with IQ=29)side 1 (13 with IQ=34)side 2
See 8ptSupergloss comment
163gsm/
90lb
3R6348
8pt / 160
gsm
3R6337
Xerox Labels
M
Paper Types can be selected within system settings or from the printer driver. If system settings are
used Coated 2 or Heavyweight 2A should be displayed on the user interface. Environmental conditions
may require that this product be fed one sheet at a time. For Tray 5(Bypass) use Coated 2 or
Heavyweight 2 (8 with IQ=27)side 1 (13 with IQ=200)side 2. Gloss variation can occur from machine
rolls, especially on high area coverage prints. User preference for Coated 1 or Coated 1 Gloss modes
may dictate using these modes.
For the latest in Xerox Supplies, contact your local Xerox Distributor, or call Xerox at 1-800-822-2200 in the USA, or call 1-800-668-0199 in Canada.
.