Installation Guide

43 Copying color files from the User Software CD
Clrfiles folder
(inside English
folder)
Cmyk_ref.ps, an 11-page, letter-size PostScript file to use for
reference when defining CMYK colors in applications.
PANTONE.ps, a 19-page, letter-size PostScript file that
indicates the closest equivalent of PANTONE coated colors
that the Fiery XJ and your particular copier model can
produce. The method used to print the Pantone.ps file differs
depending on the Spot Color Matching setting. For more
information, see the Printing Guide and the Color Guide.
Rgb_01.doc, a file you can print from Microsoft Word 6.0 or
later to view available RGB colors.
Rgb_02.ppt, a file you can print from PowerPoint 4.0 or later
to view available RGB colors.
Calibrat folder
(inside Clrfiles
folder)
Four PostScript measurements files of color patches:
custom21.ps, custom34.ps, stand21.ps, and stand34.ps.
The numbers in the filenames refer to the number of patches
on the page.
The Custom files are provided to enable you to download
measurement patches that incorporate the copier’s current
calibration set. The Standard files are provided to enable you to
download standard measurement patches that ignore the
copier’s current calibration set.
NOTE: These files are provided for expert users and should not
be used for day-to-day calibration.
Demo.mea Demo Measurement, a sample measurements file for use with
the Command WorkStation Fiery Print Calibrator. This file is
for demonstration purposes only and should not be used to
calibrate the Fiery XJ.