Installation Guide

29 Setting up the Fiery XJ as a PostScript printer
2. Click Add Port.
The available port types are displayed.
3. Select LPR Port and click New Port.
If the LPR port is not listed, install the TCP/IP protocols. See the Configuration Guide
or your Windows NT documentation.
4. Enter the IP address of the Fiery XJ.
If your network uses Domain Name Services (DNS), enter the DNS name assigned to
the Fiery XJ instead of the IP address.
5. Press Tab and type the internal name of the Fiery XJ.
This name can be simply the print queue name or it can be of the form
queue_devicename.
print_DocuColor
hold_DocuColor
print
hold
NOTE: This name is case-sensitive; type it exactly as shown above.