Installation Guide
28 Installing User Software on a Windows Computer
Completing the Windows NT 4.0 TCP/IP connection
Once you have installed the Adobe PostScript printer driver and the Fiery XJ PPD,
complete the setup for the TCP/IP and lpr connection as follows:
• Prepare the Fiery XJ to accept print jobs using TCP/IP and lpr protocols. (For
details, see the Configuration Guide.)
• Configure the workstation for the TCP/IP connection.
Before you continue, ask the system administrator for the IP address assigned to the
Fiery XJ, as well as the subnet mask and the gateway address, if they are used.
The TCP/IP Protocol and Microsoft TCP/IP Printing software should already be
installed on the Windows NT workstation.
TO SET UP TCP/IP AND LPR PRINTING FOR WINDOWS NT 4.0:
1. Open the Properties dialog box for the Fiery XJ, and click the Ports tab.