Installation Guide

20 Installing User Software on a Windows Computer
Completing the Windows 3.1x connection
To print from Windows 3.1x you need to:
• Configure a port on each Windows 3.1x computer for the network or connection
type
• Complete setup for the network type you are printing over
• Set up the Fiery XJ to accept print jobs from your computer
Selecting a printer port with Windows 3.1x
When you install a printer, Windows assigns it to a default printer port. If the Fiery XJ
is connected to your computer through a network or you want to assign it to a
different port, you need to change the port assignment. Check with your system
administrator about which port to use.
You can also use this procedure to enable printing with the parallel port.
TO SELECT A PRINTER PORT:
1. In the Control Panel window, double-click the Printers icon.
2. In the Printers window, select the Fiery XJ in the Installed Printers list box.
3. Click Connect.