Installation Guide

10 Installing User Software on a Windows Computer
7. Select Show all devices.
8. From the Manufacturers list, select “(Standard port types).” From the Models list,
select “Printer Port” (not ECP Printer Port). Click OK.
9. Click OK in the (LPT1) Properties dialog box.
N
OTE: You might need to insert the Windows 95 system CD to complete this step
depending on whether the required files are on your hard disk.
10. When prompted to restart the computer, click Yes.
After Windows 95 restarts, you can complete the procedure described in “To prepare
the printer for parallel port printing:” on page 7.
Completing the Windows 95 IPX/SPX or IPX (Novell) connection
If you are printing through a Novell server, the Novell network and file server should
be set up before you begin. The file server should be configured with a print server and
print connection for the Fiery XJ. For details see your NetWare documentation and
the Configuration Guide.
You can also use Fiery Downloader to print directly to the Fiery XJ from Windows 95
with IPX/SPX.