Installation Guide

9 Setting up the Fiery XJ as a PostScript printer
Perform the following procedure only if the LPT1 port is not currently set to
Printer Port.
TO PREPARE THE PORT FOR PARALLEL PORT PRINTING:
1. Click the Start button, point to Settings, and click Control Panel.
2. Double-click System.
The System Properties window appears.
3. Click the Device Manager tab.
4. Double-click Ports.
5. Double-click the port with (LPT1) in its name.
6. In the (LPT1) Properties dialog box click the Driver tab and then click Change Driver.