Installation Guide

5 Setting up the Fiery XJ as a PostScript printer

9. In the Available ports box, select the LPT1 port and click Next.

You will conﬁgure the port later, according to your network type.

10. Using a maximum of 20 characters, enter a name for the Fiery XJ (or leave the default

name) in the Printer Name box.

This name will be used in the Printers and queue windows.

NOTE: Entering more than 20 characters may cause printing problems with some

network applications.

11. If you want the Fiery XJ to be the default printer select Yes; if not, select No.