Installation Guide

xiv Introduction
Mac OS
To print to the Fiery XJ, you need:
A Mac OS-based computer
At least 8MB of RAM
EtherTalk installed
Apple System software version 7.0 or later
Adobe PostScript Printer Driver version 8.5 or later (version 8.5.1 is included with
the user software)
To use Fiery Downloader you also need:
A Power Macintosh computer
At least 16MB of RAM
To use Fiery WebTools, you also need:
Netscape Communicator v4.0.x with Java enabled
N
OTE
:
Netscape continues to release frequent updates to its browser. As support cannot
be guaranteed for all versions, use the version specified above for best results.
A TCP/IP enabled network and the IP address or DNS name of the Fiery XJ
Web Services enabled on the Fiery XJ
UNIX (TCP/IP)
To print to the Fiery XJ with a UNIX workstation, you need:
A workstation with standard TCP/IP connectivity (for example, Sun SPARCstation
or Silicon Graphics workstation with Solaris version 2.x or SunOS version 4.1.x
software)
TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)