Installation Guide

xii Introduction
System requirements
To install the Fiery XJ user software on a Windows or Mac OS computer, the
computer must be equipped with a built-in or external CD-ROM drive.
Windows
To print to the Fiery XJ, you need:
• A Windows-based computer with an 80486, AMD, or Pentium processor
• Windows 95, Windows 3.1x, or Windows NT 4.0
• At least 4MB of RAM
To use Fiery Downloader you need:
• Either Windows 95 or Windows NT 4.0 with NT Service Pack 3
• At least 16MB of RAM
Command WorkStation
software
Enables you to track and manage print jobs, manage
printer fonts, preview print jobs, merge documents,
perform calibration, and configure the server from a
remote workstation. For more information on the
Command WorkStation, see the Job Management
Guide .
Color management files ColorSync and ICM color management files that
enable you to maintain consistent color from your
original artwork to the colors displayed on your
monitor to the printed output.
Color reference files Reference pages that you can print to view the range
of colors available on your Fiery XJ. For the most
predictable color results, refer to these pages when
defining colors in applications.