Installation Guide
x Introduction
• The
Job Management Guide
explains the functions of the Fiery client utilities,
including the Command WorkStation, and how they can be used to manage jobs
and maintain color quality. This book is intended for an operator or administrator,
or a user with the necessary access privileges, who needs to monitor and manage job
flow, perform color calibration, and troubleshoot problems that may arise.
• The
Configuration Guide
explains basic configuration and administration of the
Fiery XJ for the supported platforms and network environments. It also includes
guidelines for setting up UNIX, Windows NT, and NetWare servers to provide
PostScript printing services to clients.
•
Getting Started
describes how to install software to enable users to print to the
Fiery XJ. Specifically, it describes installation of PostScript printer drivers, printer
description files, and other software provided on the User Software CD. It also
explains how to connect each user to the network.
•
Release Notes
provide last-minute product information and workarounds for some of
the problems you may encounter.
Specifications
The Fiery XJ has the following features:
• MIPS R5000, 200 MHz CPU
• 256MB RAM (256MB, 384MB, and 512MB configurations are available)
• Internal 4.55GB hard disk drive
• External CD-ROM drive (available as an optional kit)
• SCSI port
• Supports AppleTalk, TCP/IP, and IPX protocols simultaneously
• Supports parallel port communication
• Supports EtherTalk Phase II
• Supports thinnet (thin coaxial Ethernet cable or 10Base2), thicknet (thick coaxial
Ethernet cable or 10Base5), and unshielded twisted pair (Fast Ethernet 100BaseTX
or Ethernet 10BaseT)
• Supports Token Ring networking (available as an optional kit)