Instruction Manual

Page 2 of 3

 1-1BKVJ5: Composite patch for security fixes .

 1-1B1D7W: PHP Security Vulnerabilities found through DC260 systems.

 1-1B3N1H: SAMBA security issue.

 1-1B3GD6: ICMP Timestamp Request Information Disclosure Vulnerability.

 1-1B3N10: Web server SSL security issue

 1-1E9MF2 : Unable to modify scan templates Image compression setting to

normal.

Before installing 1-1E21N4.ps

1 Known issues listed below, read before installing 1-1E21N4.ps patch:

 This patch obsoletes all the individual patches listed above.

2 The following prerequisite(s) must be installed in the order specified before

applying the 1-1E21N4.ps patch:

 ProdID.ps

 1-U8E58

 1-18SMZM

3 Do NOT install any of the following patch(es) after installing the 1-

1E21N4.ps patch. If you must install any of the patch(es) below, do so

before installing the 1-1E21N4.ps patch:

 None.

4 This patch is exclusive, it must be installed by itself, and the server must be

rebooted or restarted once. After that, other patches can be applied to the

server.

Patch installation instructions

1 Make sure that the Fiery controller has reached Idle.

2 Import the patch file 1-1E21N4.ps using Command WorkStation to the

Direct connection.

3 You must wait until the file finishes processing and Command WorkStation

or the LCD show Idle. This ensures the patch file is completely processed.

User should wait 3 minutes for complete installation of patch.