Instruction Manual

Stacker Unload behavior change after and interrupt job
When an active job is interrupted with a Print Now or Proof,
the system will pause the current job and prompt the user to
remove current job from output tray. After the interrupt job
prints, the user is prompted to remove the interrupt job from
the output tray. The interrupted job will resume printing.
Basic Finishing Module improvements
Basic Finishing Module Improvements include
Automatic bin limits and improved bin recovery. This
feature automatically controls the number of sheets
collected and compiled in the finisher when running
unfinished sets to optimize the set drop performance.
♦
♦
♦
Stack mixed size output. This feature enables stacking of
output within a single job that contains different sizes, both
in the process and cross-process dimension.
Automatic stack height limits for small sets. This feature
automatically limits the number of stacked stapled sets to
100 when set size is 15 or less. It unloads automatically
when the limit is reached.
Low Power Mode (Production System)
This enables a site to use power saver Low Power Mode on
Production System configuration.
Copier-Printer configurable tray pop-ups
This allows the customer to decide whether they want the tray
re-loading confirmation window to display or not. By default,
any time a tray is opened/closed on a CP configuration, the
confirmation window is displayed.
DFA configuration
This addition allows configuring an attached DFA device such
as a DS5000 as a stacker or a finisher via the Device Setup
dialog window. This replaces the command line utility
DFA_IsStacker used in previous versions.
Printer On/Off
The Nuvera printer now has the option to power off the printer
independent of the digital front end.
DocuTech 180/155/128 Highlight Color Unique Additions
VIPP: Black Overprint
The VIPP 5.3a software or higher is loaded in DocuSP 5.0.
This VIPP software contains a new capability to handle black
Getting Started Guide 13