User Manual

DOCUSP 50.xx
W-6: Network configuration worksheet
Fill out the appropriate worksheet for the network configuration
the customer is using. This information is used to configure the
network through the DocuSP Network Configuration screens.
For further information on each network configuration, refer to
the DocuSP on-line help.
IP configuration
Two options are available for configuring TCP/IP on the
DocuSP.
Static IP configuration requires that the System Administrator
enter the hostname, IP address, default router gateway, and
subnetwork mask information into the Network configuration UI.
This information is available on Worksheet W-1.
DHCP, or Dynamic Host Configuration Protocol, retrieves the
values for the configuration from the DHCP server on the
network. The System Administrator can rewrite the hostname.
NIS/NIS+
The Network Information Service (NIS and NIS+) provides
simple network lookup services. The purpose of NIS and NIS+
is to provide information that needs to be known throughout the
network to all machines on the network.
If the Domain Name, Server IP Address, and Server Name are
not known, select Find One in the dialog. The appropriate
information is obtained from the NIS/NIS+ server on the
network. The server must be configured to accept broadcast
requests.
Data Element Customer Value
Find NIS+ Server Find one Specify
NIS/NIS+ Domain Name
NIS/NIS+ Server IP address
NIS/NIS+ Server Name
XEROX DOCUMENT SERVICES PLATFORM SERIES 17
GETTING READY FOR THE DOCUSP INSTALLATION