Manualshelf

Printer Operator Manual

ManualsBrandsXerox ManualsPrinterDocuColor 2045
21222324252627282930
ENHANCED HIGH
CAPACITY STACKER
EHCS FOR DOCUCOLOR 2060/2045 OPERATOR MANUAL
7
ENHANCED HIGH CAPACITY STACKER
Unloading the Stacker Tray
Use the following procedure to unload the Stacker Tray when it is full, or you
want to retrieve a job that has been completed.
1 Press the Unload button on the Stacker Control Panel. The Wait light blinks until
the Stacker Tray has reached the down position.
2 Open the front door when the Unload Light illuminates.
3 Position the securing bar on top of the stacked paper.
4 Pull the Stacker Cart straight out.
5 Remove the securing bar.
6 Remove the paper from the Stacker Tray.
7 Push the empty Stacker Cart straight into the EHCS.
8 Position the securing bar on the fixed area inside the EHCS.
NOTE: The front door will not close if the securing bar is not properly attached
to the stacker frame.
9 Close the EHCS front door.
10 Follow the instructions displayed on the digital press Touch Screen to resume
printing.