Printer Operator Manual

ENHANCED HIGH
CAPACITY STACKER
EHCS FOR DOCUCOLOR 2060/2045 OPERATOR MANUAL
5
ENHANCED HIGH CAPACITY STACKER
Paper Guidelines
• Stacker Tray will accept 64 - 280 g/m
2
- either coated or uncoated stock
with possibility of degraded stock quality and increased jam rate
• Transparencies may be run to either the Top Tray or the Stack Tray. Stack
height should be limited to 100 transparencies.
• Coated paper lighter than 100 g/m
2
may not run as reliably as coated paper
heavier than 100 g/m
2
.
• Non-standard papers longer than 305 mm (12") in the feed direction require
210 mm (8.3") minimum measurement across the feed direction.
• Non-standard papers shorter than 254 mm (10”) in the cross-feed direction
require 330 mm (13”) minimum measurement in the feed direction.
Recommended Baseline/Centerline
The following papers are considered to be baseline/centerline and are
recommended to ensure you receive the best quality from your EHCS:
• Uncoated: Xerox Digital Color Xpressions +, 90 g/m
2
, 24 lbs. In Europe, Xerox
Digital Color Colotech+ 90 g/m
2
.
• Coated: Xerox Digital Color Gloss Coated Text (120 g/m
2
/80 lbs.) In Europe,
Xerox Digital Color Colotech + Gloss Coated 120 g/m
2
.