Printer Operator Manual

ENHANCED HIGH
CAPACITY STACKER
EHCS FOR DOCUCOLOR 2060/2045 OPERATOR MANUAL
3
ENHANCED HIGH CAPACITY STACKER
Control Panel
Figure 2. EHCS Control Panel
5
8
9
7
6
1
2
3
4
Name Function
1 Ready light The Ready light blinks during initialization and is constant when the EHCS
is in use or in standby mode.
2 Sample set
button
Press to have the EHCS deliver the next collated set to the top tray.
3 Unload
button
Press once to lower the Stacker Tray and unlock the front door. If pressed
while running a job, all sheets in the paper path are delivered before the
Stacker Tray starts to lower.
4 Unload light Illuminates when the Stacker Tray has reached the down position and the
front door can be opened.
5 Wait light Blinks when the Stacker Tray is moving up or down.
6 Fault code
display
Refer to the fault code table later in this section.
7 Top tray jam
area
Blinks when there is a jam.
8 Bypass jam
area
Blinks when there is a jam.
9 Stacker tray
jam area
Blinks when there is a jam or the door is open.
Keypad Used by the service representative for diagnostics (not shown). The
keypad is located on the front right of the control panel.