Administrator's Guide

2. Select the item to be set or changed, and select Change Settings.
3. Select the appropriate option for the specific Reports feature.
4. Select Save to save the selection.
Print Reports Button
When enabled, the Print Reports button appears on the Machine Information Tab
without entering the SA passcode.
Job History Report
You can select whether or not to automatically print a Job History Report after a total
of fifty jobs have been processed.
2 Sided Report
When printing a report/list, select whether to print 1 sided or 2 sided.
Maintenance
Use this feature to further customize the machine settings for the following options:
Quick Home Setup
Use this option to create a quick page to be used as the Home screen.
Initialize Hard Disk
Use this option to initialize the machine hard disk. This erases any current data on the
hard disk.
Delete Certificates/Initialize Settings
Use this option to select Delete Job or Run Job when the machine memory is full.
Software Options
This feature is for service representatives only. For more information, contact the Xerox
Customer Support Center.
Alignment Adjustment
Use this feature to adjust the output image (such as skew or perpendicular angle) and
assign the alignment type to a specific tray. A total of 20 alignment types can be
created/configured.
Adjust Fold Position (Finisher Adjustment) - optional
This feature is available only if the optional Standard/Booklet Maker Finisher is
connected to the machine. Use this feature to adjust the fold position on the printed
output. If the optional C/Z Folder is also connected, more folding options are available.
Xerox
®
D110/D125/D136 Printer5-18
System Administration Guide
System Settings