User's Manual

In order to allow this equipment to operate in proximity to Industrial, Scientific, and
Medical (ISM) equipment, the external radiation from the ISM equipment may have
limited or special mitigation measures taken.
This is a Class A product in a domestic environment. This product may cause radio
frequency interference in which case the user may be required to take adequate
measures.
Shielded cables must be used with this equipment to maintain compliance with
Council Directive 2004/108/EC.
Compliance with EU harmonics standard EN 61000-3-12:2005
Equipment complying with EN 61000-3-12:2005
This equipment complies with EN61000-3-12:2005 which defines limits for harmonic
currents which may be produced by equipment installed in the European Union and the
European Economic Area.
Compliance is based on application of limits which justify installation and unconditional
connection to the public low voltage supply.
Compliance with EU flicker standard EN 61000-3-11:2000
Equipment complying with EN 61000-3-11:2000
This equipment is suitable for use only in premises having a service current capacity
equal to or greater than 100 Amps per phase.
Xerox
®
D95/D110/D125/D1361-4
Safety Guide
Notices and certifications