User's Manual

Safety extra low voltage approval
This Xerox product is in compliance with various governmental agencies and national
safety regulations. All system ports meet the Safety Extra Low Voltage (SELV) circuits
for connection to customer-owned devices and networks. Additions of customer-owned
or third-party accessories that are attached to the machine must meet or exceed the
requirements previously listed. All modules that require external connection must be
installed per the installation procedure.
Product safety certification
This product is certified by the following Agency using the Safety standards listed below.
StandardAgency
CAN/CSA-C22.2 No. 60950-1-07, UL 60950-1,
Second Edition
CSA International
IEC60950-1, Second EditionNEMKO
Certifications in Europe
The CE marking that is applied to this product symbolize the Xerox declaration of
conformity with the following applicable Directives of the European Union as of the
dates indicated:
December 12, 2006: Council Directive 2006/95/EC as amended. Approximation of the
laws of the member states related to low voltage equipment.
December 15, 2004: Council Directive 2004/108/EC as amended. Approximation of the
laws of the member states related to electromagnetic compatibility.
March 9,1999: Radio & Telecommunications Terminal Equipment Directive 1999/5/EC
A full declaration of conformity, defining the relevant directives and referenced standards,
can be obtained from your Authorized local dealer.
Warning
• Changes or modifications to this equipment not specifically approved by the Xerox
Corporation may void the user’s authority to operate this equipment.
1-3Xerox
®
D95/D110/D125/D136
Safety Guide
Notices and certifications