User's Manual

Europe (EU)
This product complies with IEC’s safety standard 60825-1 (Edition 1.2) issued August
2001.
The equipment complies with laser product performance standards set by governmental,
national, and international agencies as a Class 1 Laser Product. It does not emit hazardous
radiation as the beam is totally enclosed during all phases of customer operation and
maintenance.
Warning
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
This product contains laser warning labels. These labels are intended for use by the Xerox
Service Representative and are placed on or near panels or shields that require special
tools for removal. Do not remove any of the panels. There are no operator serviceable
areas in these covers.
If you need additional safety information concerning the product or Xerox supplied
materials, you may call the following number: [phone]
Operational safety
Your Xerox equipment and supplies were designed and tested to meet strict safety
requirements. These include safety agency examination, approval, and compliance with
established environmental standards.
Your attention to the following safety guidelines will help ensure the continued safe
operation of your machine:
• Use the materials and supplies specifically designed for your machine. The use of
unsuitable materials may result in poor performance of the machine and possibly a
hazardous situation.
• Follow all warnings and instructions that are marked on or supplied with the machine.
• Place the machine in a room that provides adequate space for ventilation and
servicing.
• Place the machine on a level, solid surface (not on a thick pile carpet) that has
adequate strength to support the weight of the machine.
• Do not attempt to move the machine. A leveling device that was lowered when your
machine was installed may damage the carpet or floor.
• Do not set up the machine near a heat source.
• Do not set up the machine in direct sunlight.
Xerox
®
D95/D110/D125/D1362-4
Safety Guide
Safety information