User's Manual

Trays 1 and 2
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
172
2. Place the media in the tray. Media
must be positioned against the left
side of the tray.
• Load pre-printed paper and
labels face up and with the top
toward the front of the printer.
• Load hole-punched paper with
the holes on the
right edge.
Paper must not be loaded above the
maximum fill
line.
3. Make sure that the paper guides just
touch the paper.
• To position the right side guide, squeeze the cl
amp mechanism and slide the guide to touch
the right edge of the media.
• To position the rear guide,
sque
eze the clamp mechanism
and slide the guide to touch the
rear edge of the media.
4. Close the paper tray.
The paper settings for the tray are
display
ed on the touch screen.
5. Touch Co
nfirm or change the
settings, as required.