Installation Guide

Installation and Configuration Guide 9
2
Preparation
This section explains the preparation and resources required to install the Smart Card feature.
Configuration Checklist
The following items are required to complete the installation:
Summary Status
1. Obtain the IP address or Host Name for each applicable Windows Domain Controller
2. If Domain controller certificate validation is required, obtain the DC certificate for
each applicable controller including all intermediate certificates up to the root cert.
Note: This is typically only required for CAC
3. If Online Certificate Status Protocol (OCSP) is available, obtain the IP address or Host
Name for the OCSP server
4. If a software upgrade is required obtain and install the required software release
5. Mount the smart card reader to the MFD and connect the USB cable to one of the rear
ports. See Connect the USB Smart Card Reader to the MFD on page 12
6. Install the Smart Card software Feature Enablement Key. See Enter the Smart Card
Enablement Key on page 18
7. Configure Smart Card Authentication, NTP (optional), and Alternate Login (optional).
See Configuring the Smart Card on page 20
8. Install any required certificates and configure validation settings. See Configure a
Security Certificate on page 22
9. Configure the MFD LDAP settings. See Configure Acquiring Logged-In User’s E-mail
Address on page 26
10. Configure the MFD SMTP (E-mail) and Signing/Encryption settings. See Configure
SMTP (E-mail) Settings on page 27
11. Configure Hold All Jobs/Secure Print policy if required. See Printing Features on
page 32