Installation Guide

Installation Smart Card
Installation and Configuration Guide28
b. Select Use DNS (to identify SMTP
Server) to configure the server
address using DNS, or select IP
Address or Host Name and enter the
SMTP server address.
c. Enter the required Device E-mail
Address.
d. Select Save.
Configure SMTP Authentication
13. Select SMTP - Edit.
a. Select the SMTP Authentication
tab.
b. For the required method of
authentication for SMTP Login
credentials applied to e-mail jobs
sent from the machine’s touch
interface select Logged-in User.
Note: The Logged-in user’s credentials are typically used to provide authentication for the SMTP server when
Smart Card authentication is enabled.
c. Select Always Use Kerberos Tickets.
d. Select None for automated emails.
e. Select Save.
Configure Connection Encryption
14. Select SMTP - Edit.
a. Select the Connection Encryption
tab.
b. Select the required encryption
setting.
c. Select Save.
Configure File Size Management
15. Select SMTP - Edit.
a. Select the File Size Management
tab.
Note: This screen defines how large email
payloads are managed.
b. Select the required settings.
c. Select Save