Installation Guide

Smart Card Installation
Installation and Configuration Guide 23
Create a Device Certificate
The device automatically creates a self-signed certificate. Complete this section if you want to create a new device
certificate.
5. To create a new device certificate:
a. In the Properties tab select the
Security link.
b. Select Certificates > Security
Certificates.
c. Select the Xerox Device Certificate
tab.
d. Select Create New Xerox Device
Certificate.
e. Complete the Self Signed
Certificate fields.
f. Select Finish.
g. Proceed to Configure SSL on page 24.
Import a Certificate Authority Certificate
6. Complete these steps if you want to import a certificate from a Certificate Authority:
a. In the Properties tab select the Security link.
b. Select Certificates > Security
Certificates.
c. Select the Root/Intermediate
Trusted Certificate(s) tab.
d. Click Install external
Root/Intermediate trusted
certificates.
e. Click the Browse button and
navigate to the location of your
Certificate Authority certificates.
f. Click Next.
g. If the certificate is encrypted, enter
the password at the Password Required screen.
h. Click Next.
Note: Both RootCA and Intermediate CA certificates need to be imported to the MFD to establish a ‘Chain of
Trust’ for the certificates located on the operator’s smart card.
i. Proceed to Configure SSL on page 24