Installation Guide

Installation Smart Card
Installation and Configuration Guide22
Configure Alternate Authentication
If Alternate Authentication is not required, go to Configure a Security Certificate on page 22.
4. If Alternate Authentication is enabled,
select the Authentication Servers / Touch
UI (Alternate) - Edit link in the
Configuration Settings list to configure the
server.
a. Select the Authentication Type
from the drop-down menu.
b. Select Add New.
c. Enter the required Domain or Realm.
d. Select either IP Address or Host
Name and enter the server details.
For most installations the Alternate
Authentication server will be the
same as the Smart Card Domain
Controller.
e. Select Save.
f. Select Close.
Configure a Security Certificate
If you require the MFD to be configured for certificate validation, complete this section. The following instructions
are included:
• Create a Device Certificate on page 23
• Import a Certificate Authority Certificate on page 23
• Install a Domain Controller Certificate on page 24
If certificate validation is not required, go to section Configure Smart Card Inactivity Timer on page 26.