Installation Guide

Smart Card Installation
Installation and Configuration Guide 17
6. Place the card reader on the Xerox® device
- Gently place the card reader on the device (do not fix in place at this point).
- Position the card reader in a suitable location, ensure it does not obstruct any access points or the
opening of doors or covers.
- Check the cable has sufficient length to connect to the rear of the network controller.
- Once it is in a suitable location, press firmly on the card reader to fix it in place.
7. Connect the card reader to the Xerox® device
- Insert the USB connection into the slot provided on the rear of the network controller.
- Use the cable ties provided to ensure the cabling is neat and tidy.
The hardware installation is now complete.