Administrator's Guide

Administrator Tools
ColorQube 9301/9302/9303 Multifunction Printer 219
System Administrator Guide
Setting Energy Saver Mode at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Device Settings > General > Energy Saver.
3. Touch an option:
− Intelligent Ready: The printer wakes and sleeps based on previous usage.
− Job Activated: The printer wakes when it detects activity.
− Scheduled: The printer wakes and sleeps according to a schedule you specify.
4. If you selected Intelligent Ready or Job Activated, under Fast Resume, touch On to reduce the wake
time. This option changes the default sleep and low-power timeout periods, and increases energy
usage.
5. If you selected Scheduled as the Energy Saver Mode, to select the times at which you want the
printer to wake or sleep, touch Scheduled Settings.
a. Touch a day of the week in the list.
b. To allow the printer to wake on activity for that day, under Schedule Based On, touch Activity.
To wake the printer at a certain time, touch Time.
c. If you selected Time, touch Warm Up Time, then select the time that the printer wakes on that
day. Touch Energy Saver Time, then select the time that the printer sleeps on that day.
6. Touch OK.