User's Manual

Installation

Xerox® Smart Card

Installation Guide

5. Enter the Domain Controller details for the authentication server.

a. Select Domain Controller(s)

Edit... from the Configuration

Settings list.

Note: Initially the Domain

Controller(s) will be empty and the

NTP server will not be set.

b. Select Add Domain Controller.

c. Ensure the Domain Controller

Type is configured correctly for

your authentication

environment.

d. Enter the IP Address or enter the

Domain Controller Host Name

(this must be the fully qualified

Host Name).

e. Ensure Port 88 is selected unless your Kerberos Port is different.

f. Enter the Domain (this must be the fully qualified Domain Name).

g. Select Save.

h. Select Close.

6. Configure Certificate Validation

a. Select Certificate Validation

Edit... from the Configuration

Settings list.

Note: Ensure the Domain Controller is

configured prior to the next step.

The default settings for registering

the DC with OCSP is No.

Note: Depending on your

environment, the details entered may

be case sensitive.