User's Manual

Installation
Xerox® Smart Card
Installation Guide
13
e. Set the Authentication method
on the machine's touch interface
(Touch UI) option to Smart
Cards using the drop-down
menu. If you require the device
to use the E-mail address
registered to the authenticated
user, select the Personalize the
machine’s touch interface
checkbox
f. Select Save.
g. In the CAC/PIV Enablement area,
enter the unique Feature Enable
Key provided on the inside cover
of the Smart Card Enablement
Guide.
h. Select Next.
A confirmation message is displayed.
i. Select Next. The Smart Card
settings are now ready for
configuring.
Note: No services will be restricted
until Smart Card has been fully
configured using Internet Services.