User's Manual

PDL Reference Guide for Xerox
®
ConnectKey
®
Products 4
Accessing Extended
Features
Overview
This document describes how to access the extended features of the Xerox
®
ConnectKey
®
Products for environments that do not have a custom driver.
Some of the commands & syntax used in this document requires familiarity with PostScript (PS)
or Printer Command Language (PCL).
This document provides the Printer Description Language (PDL) commands and syntax for each
feature. The following tables are also included:
Features supported by the ConnectKey Products
Commands to use in a PCL print job
Commands to use in a PS print job
The information contained in this document is not intended as a PS or PCL reference manual, but
a guide for using the extended features in PS, PCL or ASCII print jobs.
Using this Guide
Refer to the Feature List for the feature you would like to implement. Select the page number to
jump to that page.
Follow the syntax listed for the command required. Read the “Dependencies/Caveats” section for
additional information.
Feature Listing
PCL and ASCII print jobs can use PJL commands or PCL commands to access the attributes of the
printer. PostScript print jobs can use Document Structuring Commands (DSC) or PS commands. If
there is more than one method listed to access a specific feature, determine the best method for
your application and use that method. In this document, both PJL COMMENT and DSC are
referred to as Comment commands.