User's Manual

PDL Reference Guide for Xerox

ConnectKey

Products 17

Section 8 (Closing Command, Required at end of Document)

<Esc>%-12345X

Sample PJL Headers

Note: This section is only an example that may include features and commands that do not exist

for every product model.

Example 1 Header for Simple Print

<Esc>%-12345X

@PJL SET COPIES= 1

@PJL COMMENT XRXbegin

@PJL COMMENT OID_ATT_JOB_OWNER “John Smith”;

@PJL COMMENT OID_ATT_JOB_NAME “Print Job”;

@PJL COMMENT XRXend

@PJL ENTER LANGUAGE=PCL

[Insert PCL document or text to be printed here]

<Esc>%-12345X

Example 2 Header for Proof Print

This is a proof print job header that requests 6 copies

<Esc>%-12345X

@PJL SET COPIES= 6

@PJL COMMENT XRXbegin

@PJL COMMENT OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_ PROOF_PRINT

@PJL COMMENT XRXend

@PJL ENTER LANGUAGE=PCL

[Insert PCL document or text to print here]

<Esc>%-12345X

Example 3 Header for Finishing Options

This is a proof print job header requesting the staple option. You must send the job to the stacker

using the native PCL command.

<Esc>%-12345X

@PJL COMMENT XRXbegin

@PJL COMMENT OID_ATT_JOB_OWNER “John Smith”

@PJL COMMENT OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_PROOF_PRINT;

@PJL COMMENT OID_ATT_FINISHING OID_VAL_FINISHING_STAPLE;

@PJL COMMENT XRXSTAPLE=PORTRAIT;

@PJL COMMENT XRXend

@PJL ENTER LANGUAGE=PCL

<Esc>&l2G

[Insert PCL document or text to print here]

<Esc>%-12345X

*** Some Products will need to only select the Stapler, the stacker will be automatically added.