User's Manual

PDL Reference Guide for Xerox
®
ConnectKey
®
Products
Output Destination
Indicates the output bin where the print job is sent.
Note: Some output options may not be available on every product model
Output Tray PS PJL Comment Command
Simple Catch Tray
Offset Catch Tray
<< /OutputType (MiddleTray) >> setpagedevice @PJL COMMENT
OID_ATT_OUTPUT_BINS
OID_VAL_OUTPUT_BIN_MIDDLE;
Top output tray of
finisher
<< /OutputType (TopTray) >> setpagedevice @PJL COMMENT
OID_ATT_OUTPUT_BINS
OID_VAL_OUTPUT_BIN_TOP;
Finisher stacker tray << /OutPutType (Stacker) >> setpagedevice @PJL COMMENT
OID_ATT_OUTPUT_BINS
OID_VAL_OUTPUT_BIN_STACKER;
Staple
This command indicates use and location of staple(s).
PJL COMMENT Command
@PJL COMMENT XRXSTAPLE=string;
Where string is:
PORTRAIT, LANDSCAPE, DUAL
For multiple staples (4) use the command below:
@PJL COMMENT OID_ATT_FINISHING
OID_VAL_FINISHING_STAPLE_MULTIPLE;
PS
<< /Staple int /StapleDetails << /Type 1 /StapleLocation (string) >> >> setpagedevice
Where int is:
0 = No Staple, 3 = Staple at end of set
Where string is:
SinglePortrait, SingleLandscape, DualLandscape, Multiple