User's Manual

016-708
Cause: Annotation is not possible due to insufficient hard disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
016-710
Cause: Delayed print documents cannot be registered.
Remedy: Check print options and specify the print data again. If the hard disk is
malfunctioning, contact your Xerox Customer Support Center.
016-712
Cause: The machine is unable to process size, because the specified document area
is too small.
Remedy: Increase resolution or scan area size.
016-721
Cause: An error occurred during print processing. Probable causes are as follows:
• Printing was instructed by automatic tray selection when Paper Type Priority is set
to Automatic Tray Switching > Off for all paper in the Common Service Settings.
• ESC/P command error
Remedy: Perform one of the following:
• When printing by automatic tray selection, set one of the paper types to a setting
other than Automatic Tray Switching > Off in Paper Type Priority.
• Check print data.
016-735
Cause: Attempted to print Job Template List while updating the job template.
Remedy: Retry printing after waiting for a period.
016-738
Cause: Booklet Creation is not applied to the specified paper.
Remedy: Specify the printable paper size for booklet creation.
016-739
Cause: The specified document and paper size are an unauthorized combination.
Remedy: Specify the combination of the printable document and paper size for booklet
creation.
016-740
Cause: Cause: Booklet Creation is not applied to the specified paper tray.
Remedy: Specify the printable paper tray for booklet creation.
016-748
Cause: Printing is not possible due to insufficient hard disk space.
Xerox
®
Color C75 Press10-18
User Guide
Problem solving