Installation Guide

SIQA Software Installation
2-10 Simple Image Quality Adjustment Tool
Installation and Adjustments Guide
Setting Up and Running SIQA Software on an EX Print Server
1. Ensure that the cross-over Ethernet cable is installed and connected between the EX Print
Server and the print engine.
2. From the EX Print Server locate the printer IP address by selecting Command Workstation >
Device Center > General Info.
3. Record the print server IP address.
4. From the print server desktop, double-click the SIQA icon.
The Input_Communication_Parameters window displays.
5. If necessary, enter the printer IP address, and then select OK.