Manualshelf

User's Manual

ManualsBrandsXerox ManualsAll in One PrinterXerox Color C60/C70 with FreeFlow Print Server
919293949596979899100
• The PDL Settings tab: Enables you to select decomposer (processing) options.
Note
If you do not have a valid PostScript
™
license on the system, you will see PostScript
in the list of format options, but it will be grayed out and it cannot be selected.
5. When you are finished making selections, do one of the following:
• Click Cancel to exit the window without creating a new queue.
• Click Add Queue to create the new queue and exit the window.
6. Set a priority between 1 (highest priority) and 100 (lowest priority) for the queue.
The default priority setting is 50.
Each queue for the printer is assigned a priority. The priority indicates the order in
which the queues are to be processed. All jobs in the queue with the highest priority
are processed before jobs in queues having lower priorities. If a priority is not set, a
default priority of 50 is assigned to the queue when it is created. If more than one
queue has the same priority, the queues are processed in repeating succession.
7. Make any other necessary changes to the remaining fields:
• Accept
• Release
• Lock
• Hot Folder
About the Print Line
The Print Line represents the current physical setup of the print system including print
speed, resolution, and sides imaged.
The Print Line is established on the UI of the printer. The printer UI sends information
about the currently active Print Line and a list of the system’s Print Lines to the FreeFlow
®
Print Server. The Print Server uses Print Line information in the following ways:
• The active Print Line name is displayed in the main UI status area.
• Each queue is linked to a specific Print Line which is selected when the queue is
created.
• A job sent to a queue linked to a non-active Print Line can be scheduled and ripped,
but it will not be printed until the required Print Line is active.
Non-selectable Print Line information is displayed in the Basic Settings tab of the Queue
Properties or Job Properties window.
Note
The Print Line selection cannot be changed on an existing queue.
4-5FreeFlow Print Server
Online Help
Queue Manager