User's Manual

About Stock Type
Select the desired type of stock.
If you select Custom, an additional field appears where you can enter the desired stock.
About Drilled Holes
Select the desired number of holes to be drilled.
About Stock Front Coating
Select the desired coating for the front side of the print.
About Stock Back Coating
Select the desired coating for the back side of the print.
About Sides Imaged
This option determines the placement and positioning of the image or text on the page.
• 1 Sided: Only the front side of the sheet of paper is printed.
• 2-Sided: Both the front and the back sides of the paper are printed.
• Head-to-Toe: 2-sided printing where the top of each page is positioned at opposite
ends of the sheet of paper. To read the back side of the sheet, turn the sheet over
from top to bottom.
About Image Shift
The Image Shift option enables you to adjust where on a page printing occurs.
Use the Up and Down arrows to increase or decrease the amount of desired shift in
either or both the X and Y directions.
Note
A positive X value, shifts printing up; a negative value shifts printing down.
A positive Y value, shifts the printing to the right; a negative value shifts printing to the
left.
To center the printing on the page, click the Center button.
If the print is 2-sided, repeat the process for Side 2.
3-41FreeFlow Print Server
Online Help
Job Manager