User's Manual

• Cancel to exit the window without saving your selections
• Save to save your selections and close the window
About Stapling/Finishing
Select the desired option for stapling, hole punching, and/or folding.
Note
Depending on your selections, additional Stapling and/or Hole Punch menus or options
may appear where you can make additional selections.
Note
The graphical representation of the printed pages is updated to show the results of the
options selected.
About Sides Imaged
This option determines the placement and positioning of the image or text on the page.
• 1 Sided: Only the front side of the sheet of paper is printed.
• 2-Sided: Both the front and the back sides of the paper are printed.
• Head-to-Toe: 2-sided printing where the top of each page is positioned at opposite
ends of the sheet of paper. To read the back side of the sheet, turn the sheet over
from top to bottom.
About Output Location
Choose one of the following selections:
• System Specified: Allows the system to select the most appropriate output location
based on the job properties selected and the available finishing components on the
printer.
• Top Tray 1: Used for simpler jobs that do not require finishing or collated stacking.
This tray is also used as the purge destination.
• Stacker Cart: Used for most large jobs that require stacking or stapling.
• Top Tray 2: Used for simpler jobs that do not require finishing or collated stacking.
• Stacker Tray: Used for most small jobs that require stacking or stapling.
About Offset
Choose one of the following selections:
• None: Offset is not performed. This is the default selection.
• Each Collated Set: The offset occurs between each set printed.
FreeFlow Print Server3-20
Online Help
Job Manager