User's Manual

About Stock Type
Select the desired type of stock.
If you select Custom, an additional field appears where you can enter the desired stock.
About Drilled Holes
Select the desired number of holes to be drilled.
About Stock Front Coating
Select the desired coating for the front side of the print.
About Stock Back Coating
Select the desired coating for the back side of the print.
About the Output Tab
The Output tab enables you to configure finishing options. Finishing is a general term
that refers to the processes that are typically performed on a job after it is printed. The
specific finishing options that are available vary based on the capabilities of your printer
and any attached finishing units. If no finishing unit is available, the default setting is
None.
From the Output window you can configure the following basic printing properties:
• Stapling/Finishing
• Sides Imaged
• Output Location
• Offset
• Collation
• Output Delivery
• Collated Sets Offset Interval
• Output Order
• Slip Sheets
• Slip Sheets Stock
When you are finished making selections, click either:
3-19FreeFlow Print Server
Online Help
Job Manager