User's Manual

b) Hold down the left mouse button and drag the column separator appropriately:
left to decrease column width;
right to increase column width
Note
If the width of a column is too small to display the entire contents of a cell, hover
the cursor over the cell to view the full contents.
About Ineligible Jobs
A print job is ineligible for printing because the printer is not set up appropriately to
accommodate the configured job options. When this situation occurs, the job status in
the queue is updated to say Ineligible - Waiting for Resources. Additionally, an alert
icon, an Ineligible Job message, and a Details button appear in the banner area of the
Job Properties window.
For more information about the ineligible job, click the Details button located in the
Job Properties window.
An ineligible job cannot be printed because a resource required for printing is not
available. For example, if you send a job that uses a Stock property selection of Ledger
to a printer that is not loaded with Ledger stock, the job becomes ineligible. The job is
placed in the Paused list where it remains ineligible until either Ledger stock is loaded
at the designated printer or you change the job Stock property to a stock that is loaded
at the printer.
Clearing Ineligible Jobs Using the Ineligible Job Window
1. Open the Job Properties window by double-clicking the ineligible job.
2. Click the Details button in the Job Properties window.
The Ineligible Job window opens and displays a list of the resources that are needed
for the job to be printed.
3. Perform one of the following:
• Load the needed resources. When the system detects that the resources are
available, the job is automatically scheduled to print. For example, if the job
requires blue stock, the job starts to print when blue stock is added at the printer
and programmed into the Printer Manager.
• Change the job property setting to a resource that the printer currently supports.
For example, if the requested job property stock setting is blue stock and the
printer does not contain blue stock, but does contain white stock, change the job
property stock setting to white. The job is then eligible to print.
3-5FreeFlow Print Server
Online Help
Job Manager