User's Manual

• Head-to-Toe: 2-sided printing where the top of each page is positioned at opposite
ends of the sheet of paper. To read the back side of the sheet, turn the sheet over
from top to bottom.
About Output Location
Choose one of the following selections:
• System Specified: Allows the system to select the most appropriate output location
based on the job properties selected and the available finishing components on the
printer.
• Top Tray 1: Used for simpler jobs that do not require finishing or collated stacking.
This tray is also used as the purge destination.
• Stacker Cart: Used for most large jobs that require stacking or stapling.
• Top Tray 2: Used for simpler jobs that do not require finishing or collated stacking.
• Stacker Tray: Used for most small jobs that require stacking or stapling.
About Offset
Choose one of the following selections:
• None: Offset is not performed. This is the default selection.
• Each Collated Set: The offset occurs between each set printed.
• Each Uncollated Stack: The offset occurs between each stack printed.
• Each Set and Stack: The offset occurs between each set and stack printed.
About Output Order
Choose one of the following selections:
• 1-N: Ascending order
• N-1: Descending order
• System Specified
About Collation
Click your preference for collated or uncollated print sets.
About Collated Sets Offset Interval
Use the Up and Down arrows to select the desired number of sets for the offset interval.
4-21FreeFlow Print Server
Online Help
Queue Manager