User's Manual

Note
If you selected a stock from the Stock List on the Basic Settings tab, the following
properties are pre-selected:
• Size
• Weight
• Color
• Type
• Front Coating
• Back Coating
If you did not select a stock from the Stock List, you can use the properties listed above
to configure the paper stock options. Additionally, you will need to select an option from
the Drilled property.
When you are finished making selections, click either:
• Cancel to exit the window without saving your selections
• Save to save your selections and close the window
Strategies for Configuring the Paper Stock Tab
Note
The features and options available depend upon the configuration of your system.
Choose from the following strategy options:
• Use the default stock settings.
Any attributes not specified either by the submitter or in the data file are acquired
from the queue defaults.
• Select a stock from the Stock List.
This option ensures that the job uses an available stock.
• Set all properties except for Size to Use-Ready.
The system uses any available stock of the correct size. When using this option, you
can either select a size, or permit the size to be determined by the data file.
Note
If a job uses multiple page sizes, do not to set a specific size.
• Set properties to Unspecified.
• Select the Custom option for the property and enter a unique value.
Note
If the selections are not available in the printer when the job is ready to print, the
job becomes ineligible or creates a Stock Not Loaded fault.
FreeFlow Print Server4-18
Online Help
Queue Manager